Search by Title only
Home > Maintenance > Wiper blades > Replacing front windshield wiper blade

Replacing front windshield wiper blade

After turning off the vehicle, move the wiper switch to the single wiping (MIST) position within 20 seconds and hold the switch more than 2 seconds until the wiper blade is in the fully up position.

Type A

  1. Raise the wiper arm and turn the wiper blade assembly to expose the plastic locking clip.


    Wiper Arms

    • Do not allow the wiper arm to fall against the windshield, since it may chip or crack the windshield.

    • Do not pull wiper arm forward, since it could chip the hood paint.

  2. Compress the clip and slide the blade assembly downward.

  3. Lift it off the arm.

  4. Install the blade assembly in the reverse order of removal.

Type B

  1. Raise the wiper arm.

  2. Lift up the wiper blade clip (1). Then pull down the blade assembly and remove it (2).

  3. Install the new blade assembly.

  4. Return the wiper arm on the windshield.

  5. Change EV button to the ON position and wiper arms will return to the normal operating position.